General Programme 2022

30

PIN PUNCHES

drift punches

Beta’s striking tools have been designed to provide optimal performance and ensure the operator’s safety.

L

A special type of steel, which contains chrome, molybdenum and vanadium (65CrMoV2-2) is used for production, resulting in remarkably hard and tough tools. The products are made – if so allowed by their geometry – with drawn bars; otherwise, they are hot-forged in a controlled atmosphere, to avoid slag formation.

Ø mm

L mm 125 125 150 150 150

€ 6,80 6,80 9,10 9,10 9,50

  10 000300020 10 000300030 10 000300040 10 000300050 10 000300060

2 3 4 5 6

31

pin punches

3

1

L

L1

The hexagon profiles prevent the tool from rolling on the supporting surface.

2

Ø mm

L mm

L1 mm

€ 6,80 7,05 8,65 9,10

  10 000310002 10 000310003 10 000310004 10 000310005 5 000310006 5 000310008 5 000310010

2

2 3 4 5 6 8

110 22 128 35 146 45 164 55 182 65 200 80 220 95

the pin punches are fitted with extremely long though perfectly straight shanks, to allow access to small spaces.

11,40 12,10 15,20

10

3

To make sure that the pin punches are correctly sized, every single piece is faced, so that a uniform cylindrical part and a perfectly flat end can be obtained, for increased efficacy.

31/B6N

31/SP6

€ 62,50 7,50 66,50 18,20

 

31/B6N

1 000310024

1

2-3-4-5-6-8 mm

4

2002/BV6

1 020020000 1 000310030

2-3-4-5-6-8 mm 31/SP6

All the faces are subjected to induction tempering, to prevent splintering; the deformation of the striking point is a natural consequence, so that the operator’s safety can be ensured.

31/SPV

1 000310031

31BM

pin punches with handles

L

L1

5

Ø mm

L mm

L1 mm

€ 14,00 14,40 15,60 16,50 18,90 20,00

 

2 3 4 5 6 8

168 42 180 52 191 62 200 72 221 82 235 94

2 000310402 2 000310403 2 000310404 2 000310405 2 000310406 2 000310408

The centre and pin punches are sharpened after being chrome-plated, to provide improved engraving and cutting performance, and remove the galvanic deposit from the tips. Overdeposits need to be removed, to prevent “rounding” of the corners and brittleness as a result of the amount of hydrogen produced during electroplating. The worked areas are protected with a rust-proof layer.

4

€ 99,50

 

31BM/D6

1 000310420

2-3-4-5-6-8 mm



9