General Programme 2022

680

710

IMPACT SOCKETS

electronic digital torque meter Dynatester 680 for checking calibration, can be used both clockwise and anticlockwise

impact sockets, standard series

 

Ø1

Ø

• Accuracy: ±1% • 3 measuring units: Nm - lbf.ft. - lbf.in

L

UNI/ISO 2725 DIN 3129



680/2,5

 mm

Ø mm

L mm

Ø1 mm

€ 8,00 8,00 8,00 8,00 8,00 8,00 8,45 8,45 8,55 8,55 8,80 8,80 9,70 10,80

 

65 mm

7 8 9

12,5 28 19 13,8 28 19 15,0 28 19 16,3 28 19 17,5 30 19 19,0 30 19 20,0 30 22 21,3 30 22 23,8 30 22 25,0 30 22 26,3 30 22 27,5 30 22 30,0 32 22 32,0 32 22

3 007100007 3 007100008 3 007100009 3 007100010 3 007100011 3 007100012 3 007100013 3 007100014 3 007100016 3 007100017 3 007100018 3 007100019 3 007100021 3 007100022

10 11 12 13 14 16 17 18 19 21 22

65 mm

175 mm

680/40

85 mm

Impact sockets are oversized compared to hand sockets, so that they can absorb high torque as developed by impact wrenches and torque multipliers. The hexagon profile provides increased durability following intensive use. They must be used with pins and grommets to prevent disengagement from the drive. As well as the classic models in standard and long versions, a long, slim series is also available, for use in spaces where screws cannot be accessed with standard models. However, based on their significantly lower strength, caution is required when using them.

145 mm

145 mm

680/100

710/C10

10 impact sockets

85 mm

 

145 mm

150 mm

 kg

€ 1.990,00 2.000,00 2.870,00

 

Nm

680/2,5 680/40

1÷25 2,6 15÷400 4,0

1 006800002 1 006800040 1 006800100

680/100 100÷1000 4,8

682

€ 106,00

 

710/C10

1 007100910

electronic digital torque meter with transducer Dynatester 682 to be used either clockwise or anticlockwise Remarkable reading accuracy Supplied with serial output RS 232 for printers

7-8-10-11-12-13 14-17-19-22 mm

130x55x40 mm -  800 g

710/16

impact adaptor, 3/8” female and 1/2” male drives





L

682/60

Ø

682/ 400

682/1500

TECHNICAL FEATURES Reading accuracy ± 1% of the read value Available measuring units Nm-dNm-cNm-Lbf.ft-Lbf.in-Ozf.in-Kgf.m-Kgf.cm-gf.cm Supply range 90 to 264 V AC at 50/60 Hz Dimensions 235x185x185 mm Tolerance test according to norm ISO 6789 Acceptability range for each torque wrench tested Display Menu available in 11 languages Provided with all certificates required Calibration certificate with UKAS traceability

L mm 32

Ø mm   22 3/8 1/2

€ 21,70

 

3 007100810

710/20

3/8” drive impact extension bar



L

Ø

 kg

€ 5.370,00 5.450,00 5.620,00

 

Nm

682/60 682/400

1.2÷60 5,9 8÷400 6,1

1 006820006 1 006820040 1 006820150

L mm 75

Ø mm 22

€ 22,20

 

2 007100821

682/1500 30÷1500 6,4

69 